National Conveyors Company, Inc


Ash System Components -- Clinker Grinder


Clinker Grinder
Construction details

Enjoy These National Conveyors Benefits:
  • Ni-Hard replaceable, interchangeable and reversible grinder segments (min. 550 BHN)
  • Ni-hard rotor side liners and breaker plates (min. 550 BHN)
  • Grinding teeth are off-set to allow reorientation of large clinkers for efficient size reduction.
  • Rotor grinder segments can be replaced from a feed chute. Simply loosen two countersunk allen head bolts and lift out. No need to disassemble rotor and shaft assembly.
  • Ni-hard breaker plate of comb and groove design for proper product sizing. Replaceable without removing rotor.
  • Toothed, bolt-in grinder segments may be reversed end to end for maximum wear life.
  • Heavy duty reinforced plate steel housing.
  • Soft start and overload protection with use of a fluid coupling.
Clinker Grinder
Easily replaceable, reversible long wearing (Ni-Hard) rotor mounted grinder segment.




Ash Lime Handling Systems